The trigger is an aluminum match-style with a grooved, curved front surface. Typical of 1911s, the Aegis comes with a crisp, single-action trigger. These features make the gun easier to use. At the same time, all the smooth, comfortable edges and the rounded butt help reduce printing from the grip when carried. The unique design of this gun’s handle gives the gun user a good grip on the gun, allowing for a secure grip. The Aegis has G10 grips and a 24-lpi front strap checkering that allows for a secure grip for long periods. This makes the Aegis a trusty defensive weapon. In effect, you can shoot the Aegis all you want without destroying the lug. The big lug has greater mass and strength, so unlike the small lugs, it can take a pounding. If the lugs don’t have the same amount of contact with the slide-stop pin, then the lug with the most contract will break.īy switching to an integrally ramped barrel, the Aegis swaps out the two small lugs for a big lug that doubles as a feed ramp. The pin then passes through the link, and the small lugs rest on the pin. When the pistol fires, the barrel unlocks, causing the chamber end of the barrel to smack the slide-stop pin. Most 1911 barrels have two small lugs that sit on either side of a link underneath it. Remember if you follow the rules of firearm safety then it is IMPOSSIBLE for anyone to be hurt, so please just do it again.Compared to a traditional 1911, the Aegis has a feed ramp that is smoother and more durable. Ok done? Well guess what? I DON'T BELIEVE YOU, GO DO ALL THAT AGAIN TO MAKE SURE! You want no risk of putting a round through the wall and into someone's head. Now go and visually check the chamber and the mag well again. Then feel the chamber, then feel the mag well. Now first thing is first, don't be a douchebag, CLEAR THE GUN!!!!!Ĭheck the chamber, then check the mag well. You will also need something to grip with, I'm using self locking tweezers, but you could use hemostats, or if you are really adept with strong fingers, you can use regular tweezers. And some sort of small lightweight device to tap with, I'm using a screwdriver. Some kind of punch, I'm using a Dubro ball head hex driver for my R/C race truck. Ok first you are going to need a few things.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |